熱門圖片
    Saleae Logic Pro8 ...
[詳細內容]
熱門產品
SL-USBISP-A II代
SL-USBISP-A
SL-AVRISP
SLISP
雙龍單片機仿真
SL-JTAGICEmkII
SL-JTAGICE USB
ATMEGA406 智能電池應...
  當前位置:首頁 >> 臺灣研儀LABTOOL系列產品 >> 
LabTool-T400
發布時間:2018/5/30 閱讀:3098次

AEC Programmer LABTOOL-T100

 

LabTool-T400 Option 100

Single Socket Turbo Flash Programmer

 



AEC Programmer LABTOOL-T400
 
  • The LabTool-T400 Option 100 is a shirk version of LabTool-T400 with affordable price.
  • The Option 100 remove three set of pin driver on T400 only one set pin driver left on T400 , The LabTool-T400 Option 100 is idea solution to customer in R/D who need to program very high density Flash chip with low voltage such as 3.3V , 1.8V and 1.2V. those high density and low voltage do not support by Labtool-48UXP.
  • LabTool-T400 option 100 can be upgrade to full function LabTool-T400 later on by purchase extra three set of pin driver and filed install by customer.



 

LabTool-T400

Turbo Flash Gang Programmer

 


Features

  • Support 3.3V to 1.2V flash memory chip in VCC and I/O without low voltage converter.
  • Flash chip support up to 128G bit.
  • Extremely high speed: it blank check a 64M bit flash chip in 1.6 seconds, program the STM28W640CT (4 word programming algorithm) within 11.5 seconds, verify within 3.2 seconds.
  • USB interface: support USB 1.1 or 2.0
  • One PC can connect up to 16 unit Labtool-T400 to perform Asynchronous programming
  • Device insertion /continuity check before programming.
  • Target quantity and Max failure rate alarm.
  • Supports Windows 98SE / ME / 2000 / XP / Vista(32bit) / 7 / 8.1 / 10
  • 1 year warranty

 

Introduction


  • LabTool-T400 Turbo Flash Gang Programmer is four sockets PC-based Gang Programmer. It features four independent isolated modules, extremely high speed in writing flash memory chip. It supports 3.3V, 2.7V, 1.8V and 1.2V chip in both VCC and I/O without low voltage converter and handles 8/16/32 bit flash chip in different package through adapter modules, up to 128Gb flash can be support. The LabTool-T400 is an ideal programmer for customers in GSM, 3G Mobile, PDA, Internet router and others.

 

Unbeatable programming speed and throughput


  • The LabTool-T400 has build in Compact Flash Card (CF) on board that reduce the massive data transfer between the PC and LabTool-T400 .The LabTool-T400 performance reach the speed limitation of the chips in its spec. No other gang programmer today and future can beat the speed of the LabTool-T400.

 

LabTool-T400 performance ( PC with P4 1.3G 128M RAM)


 
STM 4 word algorithm
Intel EFP algorithm
Spansion word algorithm
Blank check
1.65s per 64Mb
1.65s per 64Mb
1.65s per 64Mb
Programming
11.5 sec per 64Mb
16.6s per 64Mb
29.5s per 64Mb
Verify
3.2s per 64Mb
3.2s per 64Mb
3.2s per 64Mb
Total
M28W640E in 16.3 sec
GE28F640W30B in 21.4 sec
Am29DL640G in 34.5 sec

 

3.3V to 1.2V chip in VCC and I/O support


  • The LabTool-T400 use the 90nm FPGA chip in hardware design, it can handle the chip from 3.3V to 1.2V in both VCC and I/O without need special low voltage converter circuit. This new technology fulfils customer's need and makes customer's investment fully protected.

 

High density chip support


  • The LabTool-T400 has reserved the growth potential in chip's density. It covers 8/16 bit flash today and future's 32 bit flash chip. Its I/O pin driver can cover flash with Max 128G bit in density. This growth potential protected customer's investment without purchasing a new generation programmer over a decade in future.

 

Expansion through USB Hub and configure as a Multi-station Asynchronous Gang Programmer


  • The LabTool-T400 interface with PC through USB interface, which support USB 1.1 and 2.0. If customer needs more units in production, just purchase extra LabTool-T400 and connect those LabTool-T400 through USB Hub, up to 256 LabTool-T400 can be attached to one PC. Recommend with 8-16 unit LabTool-T400 control by one PC to avoid performance decrease. Such configuration has significantly reduces the cost per station with low initial purchase cost and growth potential in future.

 

Adapter modules with ID


  • The LabTool-T400 adapter module has independent ID. After inserting the module in the LabTool-T400, the system will detect the module's ID and compare the corresponding adapter modules with the chip select in software. This future prevents the wrong adapter module insert or wrong chip selection in operation.


 



 

Device support


  • Flash memory: include NOR , NAND, EEPROM and other flash technology
  • Device data width: 8, 16 and 32 bit
  • Max flash density support: 512Mb with 128M byte Compact Flash Card install on board (standard offer), can be extend to 128Gb with exchange higher density Compact Flash Card on system hardware.

 

File format


  • Binary, Intel Hex, Intel Ext Hex, Motorola S, HP64000 ABS, Straight Hex

 

Interface to PC


  • Accept USB 1.1 or USB 2.0

 

PC system requirements


  • Operating system: Windows 98SE / ME / 2000 / XP / Vista(32bit) / 7 / 8.1 / 10
  • Processor: Pentium and above
  • Memory: 256M and above
  • Hard Disk: over 100M free space
  • CD ROM driver
  • Interface: USB 1.1 or 2.0 interface

 

General


  • Power adapter: 65W AC 100-240/47-63HZ Auto Switch.
  • Out put: DC (12V/3A, 5V/6A)
  • Operation temp: 5 to 45 degree C
  • Safety: CE&LVD certified
  • Shipment Weight: 5.0 Kg without modules.

 

Download the most update LabTool-T400 software for a trial.


LabTool-T400 All device list .


收藏該頁】【關閉窗口
 
好运来平特论坛118
Copyright © 2007-2018 雙龍電子版權所有 備案號:<粵ICP備10080904號>
星辰娱乐棋牌下载 五分彩定位胆稳赚技巧 重庆时时彩开奖直播 河南麻将规则 快三如何回血 彩票助赢软件是不是个骗局 彩专家100585时时彩 龙虎游戏赢输规则图片 双色球载止时间 高频彩分析app 六肖怎么才是中 快三大小投注技巧大全 上期开几尾数下期杀几个尾数 送10元20元提现的棋牌 球探足球比分直播数据 二人麻将规则及图解